Wire and cable extrusion machine
Introduction
The unit is used for copper core insulation coating of middle and small section production,
mainly for the soft polyviny chloride(PVC), polyethylene and other thermoplastics
Main Equipments
Take up machine
| Model |
XLM2500/4500 |
XLM3200/5000 |
| Cable OD(mm) |
φ30~φ80 |
φ40~φ200 |
| Reel Diameter(mm) |
φ2500~4500 |
φ3200~5000 |
| Reel Width(mm) |
1900~2500 |
2300~2800 |
| Max Speed(m/min) |
40 |
30 |
| Load capacity (ton) |
60 |
80 |
Traction
| TQD-4000KG Pneumatic Caterpillar |
1set |
| l Max. traction force |
4000kg |
| l Max. diameter of cable |
200mm (max) |
| l Traction speed |
20m/min |
| l Gripping length of caterpillar belt |
2900mm |
| l Width of caterpillar belt |
180mm |
| l Driving motor |
Z4-132-4/1- 18.5Kw, 1500rpm |
| l Number of pairs of cylinder |
9 pairs |
| l Center height of machine |
1000mm |
| l Direction of the machine |
R - L |
| l The bearings of main parts |
Chinese high quality brand: NSK |
150 Extrusion machine
| The screw diameter |
150mm |
| The screw length to diameter ratio |
25:01:00 |
| After sheath outside diameter |
φ35~140mm |
| Maximum traction |
2500kg |
| The production line speed |
>40m/min |
| Steel specification |
PN1600-PN3150 |
| The line plate specification |
PN1600-PN3150 |
| Equipment center high |
1000mm |
| Production line direction |
In the face of the nose left put right |
| LF1600/3150 gantry rail walking type of passive motorized |
1 sets of |
| TQD-2000kg crawler type pneumatic tractor traction before |
1 sets of |
| SJ-150X25 plastic extruder |
1 sets of |
| Automaic drying feeding device |
1 sets of |
| φ140 square sheathed the nose |
1 only |
| 24 m stainless steel water trough(including 4 meters mobile sink) |
1 sets of |
| Cable blow dry device |
1 set |
| TQD-2500kg crawler type pneumatic tractor traction after |
1 set |
| LSP1600 /walk type 3150 gantry rail line frame |
1 sets of |
| Electrical synchronization control system |
1 sets of |
Our Workshop
Our Clients
Package
Our Team
RFQ
1,
Q: What is your main brand for the electrical and mechanical parts?
A: China famous brand
2,
Q: Could we appoint the parts brand?
A: Yes, ABB, SIEMENS, Danfoss, or theirs that you like.
3,
Q: Could you please arrange the installation and commissioning?
A: Yes, we could and the buyer pay the charge
4,
Q: could you arrange the production education?
A: Yes, we could and the buyer pay the charge
5,
Q: Could you do the design for the whole plant?
A: Yes, we can.
6,
Q: Could you offer the production process design?
A: Yes, we can.
7,
Q: what is the difference with other suppliers?
A: What we could offer to other customers is not only the machine itself, also we could offer: factory design, production process design, QC control, and education and assist machine and raw material offering.
8.
Q: What's the payment terms?
A: T/T,30% deposit, and 70% balance before delivery.
9,
Q: How long the guarantee?
A: one year and charge for repair the whole life.
Enable us to give you a better quotation, please kindly provide the parameter below:
1. Coil diameter (we need to know the take-up and pay off machine size)?
2. Extrusion speed?
3. Extrusion thickness?
4. What is the material of the outer sheath? (PVC or PE or HDPE or MDPE or TPU?
Audited Supplier 
){kind=link}